emi suppression capacitors (mkp) b3202* series series/type: b32021, b32022, b32023, b32024, b32026 ordering code: b3202.a?+? date: march 2007 version: 4 content of inside pages of data sheet. data will be automatically entered into front page headlines, headers and footers. please fill in the table and then change the colour to ?white?. this ensures that the table disappears for the customer pdf. identification/classification 1: (header 1) emi suppression capacitors (mkp) identification/classification 2: (header 2) b3202* series ordering code: b3202.a?+? series/type: b32021, b32022, b32023, b32024, b32026 preliminary data (optional): (if necessary) department: fk dc pm date: march 2007 ? epcos ag 2007. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos' prio r express consent is prohibited.
emi suppression capacitors (mkp) b3202* series y2 / 300 v ac typical applications dimensional drawing y2 class for interference suppression ?line to ground? applications. climatic maximum operating temperature of 110oc climatic category (iec 60068-1): 40/110/56 construction dielectric: polypropylene (mkp) plastic case (ul 94 v-0) epoxy resin sealing (ul 94 v-0) features very small dimensions good self-healing properties high voltage capability terminals dimensions in mm lead spacing 0.4 (mm) lead diameter d 1 (mm) type 10 0.6 b32021 15 ... 27.5 0.8 b32022 ... 24 37.5 1.0 b32026 parallel wire leads, lead-free tinned. standard lead lengths: 6-1mm. marking example: special lead lengths are available on request. marking manufacturer?s logo and lot number, date code, rated capacitance (coded), capacitance tolerance (code letter) and rated ac voltage (iec) series number, sub-class (y2), dielectric code (mkp), climatic category, passive flammability category, approvals. delivery mode bulk (untaped) taped (ammo pack or reel) technical data rated ac voltage ( iec 60384-14 ) 300 v (50/60 hz) maximum continuous dc voltage (v dc) 1500 v maximum continuous ac voltage (v ac) 480 v (50/60 hz) maximum operating temperature t op,max +110 oc dc test voltage 4000 v (c 0.33 f), 3700 v (c > 0.33 f), 2 s c 0.33 f c > 0.33 f dissipation factor tan g (in 10 -3 ) at 20 c, (upper limit values) at 1 khz 1 1 c r d 0.33 f c r ! 0.33 f insulation resistance r ins or time constant w = c r ? r ins at 100 v dc, 20 c, rel. humidity d 65% and for 60 s (minimum ?as delivered? values) 100 000 m : 30 000 s passive flammability category in accordance with iec 40 (co) 752 b capacitance tolerances (measured at 1 khz) 10% (k), 20% (m) fk dc pm march 2007 please read cautions and warnings and page 2 of 5 important notes at the end of this document.
emi suppression capacitors (mkp) b3202* series y2 / 300 v ac fk dc pm march 2007 ordering codes and packing units 0.4 (mm) c r max. dimensions w h l ordering code ammo pack reel untaped mm mm pcs./unit pcs./unit pcs./unit 1 .0 nf 4.0 9.0 13.0 b32021a3102+*** 1000 1700 1000 1 .5 nf 4.0 9.0 13.0 b32021a3152+*** 1000 1700 1000 2 .2 nf 4.0 9.0 13.0 b32021a3222+*** 1000 1700 1000 3 .3 nf 4.0 9.0 13.0 b32021a3332+*** 1000 1700 1000 4 .7 nf 5.0 11.0 13.0 b32021a3472+*** 830 1300 1000 5 .6 nf 5.0 11.0 13.0 b32021a3562+*** 830 1300 1000 6 .8 nf 5.0 11.0 13.0 b32021a3682+*** 830 1300 1000 8 .2 nf 6.0 12.0 13.0 b32021a3822+*** 680 1100 1000 10 10 nf 6.0 12.0 13.0 b32021a3103m*** 680 1100 1000 10 nf 5.0 10.5 18.0 B32022A3103+*** 1170 1300 1000 15 nf 6.0 11.0 18.0 b32022a3153+*** 960 1100 1000 22 nf 6.0 12.0 18.0 b32022a3223m*** 960 1100 1000 22 nf 7.0 12.5 18.0 b32022b3223+*** 830 900 1000 33 nf 8.0 14.0 18.0 b32022a3333+*** 730 750 500 47 nf 8.5 14.5 18.0 b32022a3473m*** 680 700 500 47 nf 13.0 14.0 18.0 b32022t3473+*** - 500 300 47 nf 9.0 17.5 18.0 b32022b3473+*** 640 700 500 56 nf 9.0 17.5 18.0 b32022a3563+*** 640 700 500 68 nf 9.0 17.5 18.0 b32022a3683m*** 640 700 500 15 82 nf 11.0 18.5 18.0 b32022a3823m*** - 550 300 0 .047 f 6.0 15.0 26.5 b32023a3473+*** 680 700 720 0 .056 f 6.0 15.0 26.5 b32023a3563m*** 680 700 720 0 .068 f 7.0 16.0 26.5 b32023a3683+*** 580 600 630 0 .068 f 7.5 14.5 26.5 b32023b3683m*** 550 500 570 0 .082 f 8.5 16.5 26.5 b32023a3823+*** 480 500 510 0 .1 f 8.5 16.5 26.5 b32023a3104m*** 480 500 510 0 .1 f 10.5 16.5 26.5 b32023b3104+*** 390 400 540 0 .15 f 10.5 18.5 26.5 b32023a3154m*** 390 400 540 0 .15 f 10.5 20.5 26.5 b32023b3154+*** - - 540 0 .22 f 12.0 22.0 26.5 b32023a3224m*** - - 450 0 .22 f 14.5 29.5 26.5 b32023b3224+*** - - 540 0 .33 f 14.5 29.5 26.5 b32023a3334+*** - - 540 22.5 0 .39 f 14.5 29.5 26.5 b32023a3394m*** - - 540 0 .15 f 11.0 19.0 31.5 b32024a3154+*** - 350 320 0 .22 f 11.0 19.0 31.5 b32024a3224m*** - 350 320 0 .22 f 11.0 21.0 31.5 b32024b3224+*** - 350 320 0 .33 f 13.5 23.0 31.5 b32024a3334m*** - 250 260 0 .33 f 14.0 24.5 31.5 b32024b3334+*** - - 260 0 .47 f 15.0 24.5 31.5 b32024a3474m*** - - 240 0 .47 f 18.0 27.5 31.5 b32024b3474+*** - - 200 0 .47 f 16.0 32.0 31.5 b32024c3474+*** - - 220 0 .56 f 16.0 32.0 31.5 b32024a3564+*** - - 220 0 .68 f 19.0 30.0 31.5 b32024a3684m*** - - 180 0 .68 f 18.0 33.0 31.5 b32024b3684+*** - - 200 0 .68 f 21.0 31.0 31.5 b32024c3684+*** - - 180 0 .82 f 22.0 36.5 31.5 b32024a3824+*** - - 160 27.5 1 .0 f 22.0 36.5 31.5 b32024a3105m*** - - 160 further e series and intermediate capac itance values are available on request. composition of ordering code + = capacitance tolerance code *** = packing code m = 20% 289 = ammo pack k = 10% 189 = reel pack 000 = untaped (lead length 6-1mm) please read cautions and warnings and page 3 of 5 important notes at the end of this document.
emi suppression capacitors (mkp) b3202* series y2 / 300 v ac ordering codes and packing units 0.4 (mm) c r max. dimensions w h l ordering code ammo pack reel untaped mm mm pcs./unit pcs./unit pcs./unit 0 .33 f 12.0 22.0 41.5 b32026a3334+*** - - 135 0 .47 f 14.0 25.0 41.5 b32026a3474+*** - - 115 0 .56 f 14.0 25.0 41.5 b32026a3564m*** - - 115 0 .56 f 16.0 28.5 41.5 b32026b3564+*** - - 100 0 .68 f 16.0 28.5 41.5 b32026a3684+*** - - 100 0 .82 f 16.0 28.5 41.5 b32026a3824m*** - - 100 0 .82 f 18.0 32.5 41.5 b32026b3824+*** - - 90 1 .0 f 18.0 32.5 41.5 b32026a3105m*** - - 90 37.5 1 .0 f 20.0 39.5 41.5 b32026b3105+*** - - 75 further e series and intermediate capac itance values are available on request. composition of ordering code + = capacitance tolerance code *** = packing code m = 20% 289 = ammo pack k = 10% 189 = reel pack 000 = untaped (lead length 6-1mm) approvals standards certificate marks of conformity en 132400 / iec 60384-14 (300 v ac) ul1414 (250 v ac) ul1283 (400 v ac) csa c22.2 no.1 (250 v ac) csa c22.2 no.8 (400 v ac) 40018909 e97863 e301966 e97863 e301966 ( 1 ) ( 1 ) approved by ul dv/dt and k 0 values 0.4 (mm) 10 15 22.5 27.5 37.5 dv/dt (v/s) 800 600 500 400 300 k 0 (v 2 /s) 677000 508000 423000 338000 254000 note: the maximum values of dv/dt and k 0 must not be exceeded in order to avoid overheating of the capacitor. fk dc pm march 2007 please read cautions and warnings and page 4 of 5 important notes at the end of this document.
important notes fk dc pm march 2007 page 5 of 5 the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application. these statements are based on our knowledge of typical requirem ents that are often placed on our products in the areas of application c oncerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the su itability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malf unction of passive electroni c components or failure before the end of their usual service life cannot be comp letely ruled out in the current state of the art, even if they are operated as specified. in customer applicatio ns requiring a very high level of operational safety and especially in customer appl ications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in a ccident prevention or life-sa ving systems), it must therefore be ensured by means of suitable design of the customer app lication or other action taken by the customer (e.g. installation of protecti ve circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certai n technical requirements, some of the products described in this publication may contain substances subject to restrictions in cer tain jurisdictions (e.g. because they are classed as ?hazardous?) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). s hould you have any more detailed questions, please contact our sales offices. 5. we constantly strive to impr ove our products. consequently, the products described in this publication may change from time to time. the same is true of the correspondi ng product specifications. please check therefore to what extent product descriptions and specifications cont ained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products. consequently, we cannot guarantee that all products named in this publication will always be available. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for products and serv ices in the electrical industry? published by the german electrical and elec tronics industry association (zvei) . 7. the trade names epcos, epcos-jones, alu-x, bao ke, ceradiode, cssp, mlsc , motorcap, phasecap, phasemod, siferrit, sifi, siko rel, silvercap, simid, siov , sip5d, sip5k, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
